The response to new IMO regulations will likely involve changes to ships, marine fuels, refining, and some infrastructure in the next six to eight years. Shutterstock photo.
New IMO regulations begin in January 2020 and limit sulphur content in marine fuels
By Corrina Ricker, Nicholas Chase, Mark Schipper, Mason Hamilton
This article was published by the US Energy Information Administration on Feb. 4, 2019.
The implementation of new regulations affecting marine fuel specifications will have implications for crude oil and petroleum product markets over the coming decade. Previous Today in Energy articles described these regulations and the short-term implications for refining margins through 2020.
Today’s article discusses the longer-term implications of the market changes projected in EIA’s recently released Annual Energy Outlook 2019, as the response to these regulations will likely involve changes to ships, marine fuels, refining, and some infrastructure in the next six to eight years.
The International Marine Organization’s (IMO) new regulations limit the sulphur content in marine fuels used by ocean-going vessels in international waters to 0.5 per cent by weight starting in January 2020, a reduction from the previous global limit of 3.5 per cent established in 2012.
This lower limit will change the way bunker fuel (the fuel mix consumed by large ocean-going vessels) is consumed in the United States, which, according to AEO2019, accounted for about 411,000 barrels per day (b/d) in 2018.
This volume represents 3 per cent of total transportation energy use and 1 per cent of total U.S. petroleum and liquid fuel use.
This upcoming change will have wide-scale repercussions for the shipping industry and refineries in the United States and worldwide.
Globally, marine vessels account for a critical part of the global economy, moving more than 80 per cent of global trade by volume and more than 70 per cent by value. Marine vessels also consume about 4 million b/d of petroleum, 4 per cent of total global oil consumption.
As outlined in a previous Today in Energy article, there are three main pathways for meeting the more stringent sulphur content regulations:
- Installing scrubbers to remove pollutants from ships’ exhaust so ships can continue consuming high-sulphur residual fuel oil
- Switching to lower-sulphur residual fuel oil or blending with distillate fuel oil to achieve lower-sulphur fuel mixes
- Switching from petroleum-based fuels to other fuels such as liquefied natural gas (Because this option involves retrofitting costs, it is likely to be constrained to new builds.)
Residual oil currently accounts for the largest component of bunker fuel. EIA projects that the share of high-sulphur residual fuel oil consumed by U.S. ocean-going marine vessels will quickly drop in the near term, from 58 per cent in 2019 to 3 per cent in 2020 because few ships currently have scrubbers installed or will have them installed by 2020.
As some ships install scrubbers that allow them to consume higher-sulphur fuels, EIA expects the residual fuel share to rebound partially to 24 per cent in 2022.
Switching to lower-sulphur residual fuel oil or higher distillate blends is likely to be a more common compliance option for U.S. vessels. EIA projects that the share of low-sulphur residual fuel oil consumed in the U.S. bunker fuel market will increase from close to zero in 2018 to 38 per cent in 2020.
Similarly, EIA projects that the need to use distillate in lower-sulphur bunker fuels will increase distillate’s share of U.S. bunkering demand from 36 per cent in 2019 to 57 per cent in 2020. After 2020, these fuels continue to account for relatively large shares of the fuels used in marine vessels.
EIA expects the use of liquefied natural gas (LNG) in U.S. marine bunkering to be limited in the next five years, reflecting the limited infrastructure available to accommodate LNG bunkering at U.S. ports. As infrastructure adapts, LNG’s share of U.S. bunkering grows to 7 per cent in 2030 and to 10 per cent in 2050.
Similar to the January Short-Term Energy Outlook (STEO) forecast, the AEO2019 Reference case projects that the U.S. refining sector will respond to the projected lower demand for high-sulphur residual fuel oils as well as increased demand for low-sulphur fuels in two ways: increasing refinery utilization and switching to lower-cost inputs.
Much of U.S. refining capacity, especially on the U.S. Gulf Coast, has downstream units that upgrade residual oils into more valuable and lower-sulphur products. These complex units can process heavier and higher-sulphur crude oils that yield large quantities of residual oils.
U.S. refinery utilization increases to 96 per cent in 2020 and remains between 90 per cent and 92 per cent after 2026 through 2050 in the AEO2019 Reference case as these refineries aim to convert heavy, high-sulphur crude oil and residual fuel oil into lower-sulphur fuels. This change results in both increased imports of unfinished oils and increased exports of lower-sulphur diesel and residual fuels to supply the global market.
The This Week in Petroleum article published on January 30, 2019, provides additional analysis of the market implications for refinery margins through 2050. Diesel fuel is expected to have higher refinery margins than other petroleum products such as motor gasoline and jet fuel once the IMO regulations are in effect.
Be the first to comment